Innomedia Dial plan won't load

[ref121]

The VT dial plan per the FAQ is as follows:

(*xx|*xxxxxxxxx|*xxxxxxxxxxxxx|*xxx|xxx|xxxx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.|011xxxxxxxxxx.|011xxxxxxxxxx)"

When I try to send this (via telnet) to my device, it takes the entire list of strings up to "1xxx[2-9]xxxxxxS0" but leaves out everything after the closing bracket symbol "]". Maybe it doesn't like "SO".

My device is the unlocked SR Innomedia MTA 6328-2Re. Has anyone succeeded in feeding this beast the full meal?

The original link for the FAQ is https://support.viatalk.com/index.php?_a=knowledgebase&_j=questiondetails&_i=124&nav=+%26gt%3B+%3Ca+href%3D%27index.php%3F_a%3Dknowledgebase%26_j%3Dsubcat%26_i%3D42%27%3EInstallatio n+Guides%2FTech%3C%2Fa%3E+%26gt%3B+%3Ca+href%3D%27index.php%3F_a%3Dknowledgebase%26_j%3Dsubcat%26_i% 3D61%27%3ENon-Asterisk+BYOD+Configuration%3C%2Fa%3E

[Brian188]

The VT dial plan per the FAQ is as follows:

(*xx|*xxxxxxxxx|*xxxxxxxxxxxxx|*xxx|xxx|xxxx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.|011xxxxxxxxxx.|011xxxxxxxxxx)"

When I try to send this (via telnet) to my device, it takes the entire list of strings up to "1xxx[2-9]xxxxxxS0" but leaves out everything after the closing bracket symbol "]". Maybe it doesn't like "SO".

My device is the unlocked SR Innomedia MTA 6328-2Re. Has anyone succeeded in feeding this beast the full meal?

The original link for the FAQ is https://support.viatalk.com/index.php?_a=knowledgebase&_j=questiondetails&_i=124&nav=+%26gt%3B+%3Ca+href%3D%27index.php%3F_a%3Dknowledgebase%26_j%3Dsubcat%26_i%3D42%27%3EInstallatio n+Guides%2FTech%3C%2Fa%3E+%26gt%3B+%3Ca+href%3D%27index.php%3F_a%3Dknowledgebase%26_j%3Dsubcat%26_i% 3D61%27%3ENon-Asterisk+BYOD+Configuration%3C%2Fa%3E

That Dial Plan is for Linksys devices. The correct DP for your device is all over these forums. Search is your friend.

[ref121]

Brian
All over these forums? Maybe there's a working plan for the SR AC-211, but not for the Innomedia MTA6238 gizmo. Search for yourself.

[diogenes]

The VT dial plan per the FAQ is as follows:

(*xx|*xxxxxxxxx|*xxxxxxxxxxxxx|*xxx|xxx|xxxx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.|011xxxxxxxxxx.|011xxxxxxxxxx)"

When I try to send this (via telnet) to my device, it takes the entire list of strings up to "1xxx[2-9]xxxxxxS0" but leaves out everything after the closing bracket symbol "]". Maybe it doesn't like "SO".

My device is the unlocked SR Innomedia MTA 6328-2Re. Has anyone succeeded in feeding this beast the full meal?

I can't vouch for your suggested dial plan, but I can help you on the rest. My gizmo would occasionally refuse to take the entire string at once. Load half of it at a time. Press "e" to erase everything; then "a" to add to string. Select about half of the string(don't include the trailing "|" - it will be added automatically) and paste it into the telnet window. Then press "a" again and paste the remainder.

i.e. - load "*xx|*xxxxxxxxx|*xxxxxxxxxxxxx|*xxx|xxx|xxxx|[3469]11|0|00|[2-9]xxxxxx"
then "1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.|011xxxxxxxxxx.|011xxxxxxxxxx"

Don't include quotes or parentheses. FWIW, I went back to the original SR dial plan.

Good luck.

[diogenes]

Brian
All over these forums? Maybe there's a working plan for the SR AC-211, but not for the Innomedia MTA6238 gizmo. Search for yourself.
I don't think the issue is the dial plan. I think the gizmo is having problems passing DTMF to VT's servers. I've tried two phones, my Uniden TRU8885 that worked fine for the two years with SR and a old Sony 900mhz 2 line cordless. The Uniden might work dialing out 2% of the time if I don't use speeddial - dial the digits slowly. The Sony will successfully dial out about 80% of the time. I'm not sure what the deal is as the Uniden worked fine for a couple days last week with VT.

I've got a PAP2T-NA on order - should be here next week. If that doesn't work, I'm cancelling VT and trying somebody else...

[mcpogue]

S0 is not legal on the innomedia T and t are timers.