Rggoalie3
07-28-2007, 11:37 PM
Ok, so heres the deal, I got a BYOD plan after unlocking my SPA2102. Then I figured I would upgrade my firmware... But it was taking too long. And then is when things went bad. The upgrade tool suggested a factory reset if you have problems.... So thats what I did. :mad: If you don't already know this BRICKS your SPA2102.
So....I figured, meh, I'll just go buy an adapter. Well, all Frys Electronics had was vonage adapters. I had seen unlock instructions on the net and figured it wouldn't be a big deal..... WRONG. The PAP v1 is easy to unlock, but the PAP2 2...not so much.
Heres what I finally did to unlock the device. In case anyone else needs help unlocking the PAP2 v2
1 ) Download the CTY Device Unlock too here....
http://www.bargainshare.com/index.php?showtopic=87504
2 ) Connect your PAP2 v2 to your router and check your DHCP table to find your PAPv2's IP address.
3 ) Disconnect internet.
4 ) Reset your PAP2v2 using the red button on the back of the device.
5 ) After a few seconds, open internet explorer and type in the address of your PAP2v2.
6 ) Log in using user "admin" password "admin" (Without quotes)
7 ) Run the CTY program you downloaded.
8 ) First press "3" and enter your PAP2 v2's IP and hit enter.
9 ) After you are returned to the main menu, press option 1.
10 ) Press enter at the next screen and wait for the program to do it's thing.
11 ) Open IE to your PAP2 v2's IP address.
12 ) Login with user "admin" password "admin" (no Quotes)
13 ) Go to the administrator section, change your SSH option and press save.
14 ) You will be prompted for a username and password. Use Admin / Admin. (Yes, the case does matter)
15 ) Here are the config pages for you!!!
http://(Your[/url] IP Address Here)/Voice_adminPage.html
http://(Your[/url] IP Address Here)/Provision.html
All done! I don't want to take credit for this... I got alot of bits and pieces from all over the place on the internet.
Now, I'm not sure how much of this is redundant or unnecessary, but it works.
So.... Does anyone have config screenshots for this guy? It's not the same as the PAPs v1
So....I figured, meh, I'll just go buy an adapter. Well, all Frys Electronics had was vonage adapters. I had seen unlock instructions on the net and figured it wouldn't be a big deal..... WRONG. The PAP v1 is easy to unlock, but the PAP2 2...not so much.
Heres what I finally did to unlock the device. In case anyone else needs help unlocking the PAP2 v2
1 ) Download the CTY Device Unlock too here....
http://www.bargainshare.com/index.php?showtopic=87504
2 ) Connect your PAP2 v2 to your router and check your DHCP table to find your PAPv2's IP address.
3 ) Disconnect internet.
4 ) Reset your PAP2v2 using the red button on the back of the device.
5 ) After a few seconds, open internet explorer and type in the address of your PAP2v2.
6 ) Log in using user "admin" password "admin" (Without quotes)
7 ) Run the CTY program you downloaded.
8 ) First press "3" and enter your PAP2 v2's IP and hit enter.
9 ) After you are returned to the main menu, press option 1.
10 ) Press enter at the next screen and wait for the program to do it's thing.
11 ) Open IE to your PAP2 v2's IP address.
12 ) Login with user "admin" password "admin" (no Quotes)
13 ) Go to the administrator section, change your SSH option and press save.
14 ) You will be prompted for a username and password. Use Admin / Admin. (Yes, the case does matter)
15 ) Here are the config pages for you!!!
http://(Your[/url] IP Address Here)/Voice_adminPage.html
http://(Your[/url] IP Address Here)/Provision.html
All done! I don't want to take credit for this... I got alot of bits and pieces from all over the place on the internet.
Now, I'm not sure how much of this is redundant or unnecessary, but it works.
So.... Does anyone have config screenshots for this guy? It's not the same as the PAPs v1