Linksys WRTP54G-NA Configuration for ViaTalk Shown Here!!!!

[abaldish]

:D Here is the complete configuration for the linksys WRTP54G-NA for ViaTalk, This unit was a Vonage unit that was unlocked and flashed with the newest software from linksys which is Ver 3.1.24.

Also to take the new firmware you will need to unlock the unit by using cyt 4.6 for Windows (http://www.bargainshare.com/goto.php?http://www.dslreports.com/r0/download/1098007%7E6f3e709c3920e98e7ad7277378f5d6a7/cyt46_win32.zip)

Linksys wrtp54g.pdf configuration for Viatalk (http://webpages.atlanticbb.net/~abaldish/wrtp54g.pdf)

Firmware:

New WRTP54G-NA firmware 3.1.24 released 3-27-07

New WRTP54G-NA firmware 3.1.24 released 3-27-07 (http://www.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=US%2FLayout&cid=1115417109974&packedargs=sku%3D1150490342550&pagename=Linksys%2FCommon%2FVisitorWrapper)

Here is the Dial Plan i have in place on mine:

(*xx.|[3469]11S0|0|00|<:1814>xxxxxxx|[2-9]xx[2-9]xxxxxxS0|1[2-9]xx[2-9]xxxxxxS0|011xxxxxxxxxx|011xxxxxxxxxx.|1900xxxxxxx!|1976xxxxxxx!|976xxxxxxx!)

As you can see above i have the 900 numbers blocked, never know if one can slip by or not! :) Sub the 814 for your area code!!!!

[hmarq]

I serached around and this was the easiest instructions I found. Only problem is the .pdf file link is not working. Can you fix??

[abaldish]

I serached around and this was the easiest instructions I found. Only problem is the .pdf file link is not working. Can you fix??

That is strange i just loaded here with no problems at all.

[Virtualzoo]

Hey. I got a vonage WRTP54G the other day. Before I connected it to the internet I unlocked it and put the 3.1.24 firmware on it. For the voice section I think it used 3.1.22 or something. But anyways. I used the guy that started this threads settings. My problem is that for caller ID for incoming calls whether its a house call or a cell call or who ever is calling all I get is the phone number in line 1 and repeated in line 2. I dont have any names in my caller ID. I even set my cellphone in the custom caller ID list to show my name and it still wont show up. I called Viatalk CS and they told me they dont know and everything seems fine on their end. They said to make a ticket for a engineer to look at it. Any ideas? Seems to work great otherwise. Sometimes I get a cuts in the voices.

[hpvan01]

I have the same problem as hmarq, the link wrtp54g.pdf is not working. Please fix it abaldish so I can down load it.

[b_mandal]

unable to access the file!

on click the link' Linksys wrtp54g.pdf configuration for Viatalk ' gives the following message! Sorry, the Server failed to retrieve the requested data.
file is not found.
Could anyone help me out by uploading the file! I highly appreciate it! Thanks in advnace!

[crapoid685]

Can someone please post this file with a valid link, or just paste the settings from the pdf into a post? I've been looking for these settings for a while. Thanks.

[muralinet]

Would any of you able to get the above .pdf doc. I have unlocked a old WRTP54G for a viatalk connection. Incoming calls are working fine, but outgoing calls are failing. There is dial tone initially but when I a press a button, it gets a busy tone. Appreciate if any one could help me with this problem...

Thanks!!!

[asterisk54]

have yohttp://storeyourpicture.com/images/signature_Webdesigns.jpgu tried using IE when you access your router??maybe it can download the firmware upgrade there..i experienced the same problem before and worked well..