Linksys WIP330 SIP configuration

[karanv]

I have a Linksys BYOD WIP330 SIP iphone. Does anyone have the settings I can use to configure this to work. Info required is as follows, thanks in advance.

• Proxy ip
• Proxy port
• Register proxy ip
• Register proxy port
• Outbound proxy ip
• Outbound proxy port
• Expire time
• Payload type
• Packet time
• Dtmf (enabled/disabled)
• Udp port
• Rtp port
• Register proxy port

[shadowrt]

Two months and nobody has a thing to say about the wip330?
Somebody must have one...

[rgadagno]

Login to your control panel and select the softphone config. Pick the generic. I got the Ustar f1000 working fine.

[ctyler2621]

:D Here is what I have and it's working fine for both incoming and outgoing calls, hope this helps for some other poor bastard like me that couldn't find ANYTHING for the Linksys WIP330 Wi-Fi Phone.

Proxy IP: newyork-1.vtnoc.net
Proxy Port: 5060
Register Proxy IP: newyork-1.vtnoc.net
Register Proxy Port: 5060
Outbound Proxy IP: newyork-1.vtnoc.net
Outbound Proxy Port: 5060
Expire Time: 3600
Display Name: (Does not matter)
Phone Number: (phone number)
User name: (phone number)
Password: (password)
Payload Type: G.17u,G.711a,G.729
Packet Time: Small
DTMF Relay: Disable
UDP Port: 5060
RTP Port: 2070
Session Timer: 0
SIP Format: Normal